Browsing Category

Silhouette Cameo Projects

Decoratiing Silhouette Cameo Projects

Your Facade is Slipping

September 22, 2015

Is it just me, or does it seem like posts lately are about things gone awry one after the other? I don’t recall breaking a mirror recently, or crossing a black cat’s path; not that we believe in that sort of thing at all. Nonetheless, this happened:

the right way to hang plates via here-lately.com

Yep. Another one bit the dust. If you remember our silhouette plate wall looked like this after we completed it in June:

plate gallery here-lately.com

A mere 4 months later and we’ve lost two plates; the clear monogram plate and now the Michael plate. The monogram plate I stuck to the wall using mounting tape, so I wasn’t shocked that it fell. I also wasn’t that sad about it, either. I knew I could easily replicate it. (I bought the clear plate at Wal-Mart for a few dollars.) The platter, on the other hand, now that I’m sad about. I found that platter at a thrift store for $3. When I saw it, I immediately grabbed it and hid it in my cart for fear that someone might try to take it from me. It was that awesome.

I hung the platter the same way I did the other silhouette plates, I Gorilla Glued a picture hanging bracket to the back of it.

plate gallery here-lately.com

This is the same method I used to hang two plates on our gallery wall in the living room 2 years ago. I’ve never had a problem with them, so I assumed that the picture hangers would work for this wall as well. I’m guessing that the platter was just too heavy for the glue + hanger, and/or that the heat played a role as well. (We’ve been cutting back on AC use, so it’s gotten pretty warm in there over the last few weeks of summer.) Whatever the cause, I wasn’t taking the chance that it would happen to the other plates, so I took them all down until I could find a better solution.

I was searching for actual plate hangers online, when I found these guys on Amazon.com:

plate hangers via here-lately.com

(via)

They come in varying sizes and hold different weights, so I decided to give them a try. After all, they’re “safety assured”. Well, we shall see. I’ve been to the thrift store again a few times, but I haven’t found a replacement platter yet. Sigh. I’ll let you know how the hangers work and all that jazz, once I find another platter. That’s assuming I ever do. Also, I just want to say, that I’ve tried very hard to refrain from saying “a platter for Michael’s face” or making any really bad plate / wall related puns. Or at least I didn’t point them out to you. Even in sad times, you’ve got to find the pun in life.

 

Decoratiing DIY Tutorials Silhouette Cameo Projects

How to Make a Silhouette from a Photograph

June 19, 2015

On Wednesday we shared our silhouette plate gallery.

plate wall1 here-lately.com

I am happy to report that everything is still hanging on the wall. Even with kids running up and down the stairs and banging on the walls with toys, it’s all still intact.

Today I am going to share how I made the silhouettes from regular ole jpg images. Brace yourself, there are going to be a lot of screen shots.

First, you need a profile shot of your subject and a contrasting background. (A solid wall would work best, but sometimes you just have to work with what ya got.) Here is the photo I started with:

here-lately.com

(This is a picture of me when I was about 8 months pregnant with Emerson.)

I used Adobe Photoshop CC 2014, but other versions should work. You really just need the magnetic lasso tool. After opening the photo I cropped it just below the shoulder. I also found it helpful, if it wasn’t already, to change my photographs to black and white (Image > Adjustments > Black and White) and then mess around with the brightness/contrast to make a greater difference between the features you want in the silhouette and the parts you are going to discard; it’s easier for the lasso tool, too.

making silhouettes from photographs here-lately.com

After getting the contrast where I wanted it, I used the selection tool to select the entire image, copied it (Command+C on Mac or Control+C on PC), and created a new layer (by clicking the icon on the bottom right side that looks like a sheet of paper with a folded corner). Then I pasted the picture to the new layer (Command+V or Control+V). After that I  shut off the original background by clicking on the eye next to it.

making a silhouette from a photograph here-lately.com

Next I selected the magnetic lasso tool, and used it to select my hair and face.

make a silhouette from a photo here-lately.com

For more detail oriented areas, it’s helpful to click the lasso where you want it to stick, rather than just moving it along the image. I did this along the tip of my nose, my lips, and the bottom portion of hair. It may take a few attempts to get it right, so be patient.

make a silhouette from a photo here-lately.com

When I had my selection like I wanted it, I clicked Select > Inverse. This excludes what you selected and selects everything else — in this case, the background.

make a silhouette from photograph here-lately.com

Then I hit delete. Breath easy. It just deletes all the things around the image that you don’t want. My image was left looking like this:

make a silhouette from photograph here-lately.com

Then I clicked Select > Inverse again so that just the silhouette was selected. After that, I clicked Edit > Fill.

make a silhouette from photograph here-lately.com

make a silhouette from photograph here-lately.com

After clicking OK things looked like this:

make a silhouette from photograph here-lately.com

I did use the eraser to clean it up a bit, and the brush tool to add the lashes. With that done I saved the file as a jpg.

From here you could print the photo and frame it. If you wanted to put it on a plate, but don’t own a Silhouette machine, you could print it, cut it out, and then trace it onto a sheet of vinyl.

After saving it in photoshop, I opened it in my Silhouette software.

make a silhouette from photograph here-lately.com

Next I clicked on the trace button.

make a silhouette from photograph here-lately.com

With the trace feature activated, I clicked on Select Trace Area and made a square around the silhouette, then clicked Trace Outer Edge.

make a silhouette from photograph here-lately.com

Next I moved the original image off to the side. I then clicked on the cut button, selected Vinyl for my medium, and then clicked Send to Silhouette.

Scremake a silhouette from photograph here-lately.com

I had pre-measured the center of my plates before doing all the photo editing, but I still did a few practice cuts on a sheet of paper, just to make sure I had the right size to fit in the middle of the plate.

how to make a silhouette from a photo here-lately.com

I also decided to cut small circles in the end of the hair pieces to add more detail. I’m really glad that I did, because it’s one of my favorite details. After that it was just a matter of peeling the backing off the vinyl and sticking the silhouette on the plate.

how to make a silhouette from a photo here-lately.com

make a silhouette from photograph here-lately.com

If you don’t have Photoshop you can download a free 30 day trial from the Adobe website. I know other people have also had success using paint.net, which is free program for PC users. Or if you share this post, and leave us a comment letting us know that you shared it, then I could end up making a silhouette for you. (You can find out all the details on the post.) We pick a winner on Monday, so don’t delay!

If you have any questions leave us a comment. If you make you’re own, be sure to send us a picture!